HEOSafe for Fiat Ducato: Which lock fits?

HEOSafe for Fiat Ducato: Which lock fits?

15/07/2026
HEOSafe Product Guide for Motorhomes & Camper Vans

Which HEOSafe additional lock fits my Fiat Ducato?

For Fiat Ducato X250/X290 up to 2021, the older cab version fits. For Ducato from Series 8 with the new door trim, the new version is intended. For Series 9/10 and transitional years, compare the door trim before ordering. Then select the locks for cab, sliding, or habitation door.

Fiat Ducato Peugeot Boxer Citroën Jumper Opel Movano Toyota Proace Max
HEOSafe additional lock in the cab of a Fiat Ducato
HEOSafe Ducato: quick decision

Which HEOSafe lock fits my Ducato?

The version for the cab depends on the door trim. Registration year alone is not reliable for selection when models change.

Vehicle Suitable cab version Proceed to selection
Fiat Ducato X250/X290, 2006–2021 Older door trim View lock for X250/X290
Fiat Ducato Series 8/9/10 with new door trim New version from Series 8 View lock from Series 8
Peugeot Boxer / Citroën Jumper Up to 2024 older, from 2025 new version Compare door trim
Opel Movano / Toyota Proace Max Check model and door trim; Proace Max from 2024 with new version See model table

Further HEOSafe locks are available for sliding, rear, and habitation doors. You will find the right combination by vehicle type and the product tables below.

Direct selection

What type of vehicle do you have?

First select your vehicle type. You will jump directly to the suitable HEOSafe door security, product table, and year assignment.

HEOSafe motorhome

HEOSafe additional locks for semi-integrated and A-class motorhomes with habitation door

The cab doors are mechanically locked from the inside with a HEOSafe deadbolt lock. Afterwards, you exit the vehicle through the separate habitation door. For the HEOSafe habitation door lock and the rear garage, there are additional locks available that can be operated from inside and outside.

Typical combination: One cab set for driver's and passenger doors plus one habitation lock. For a rear garage with two hatches, we recommend the keyed-alike set with three habitation locks.
HEOSafe keyed-alike set with cab locks and one habitation lock
Habitation door

Keyed-alike set with 1 habitation lock

For driver's and passenger door plus one separate habitation door. All locks are operated with the same key.

  • 1 cab set with 2 additional locks
  • 1 habitation lock
  • keyed alike
HEOSafe keyed-alike set with cab locks and three habitation locks
Habitation door & rear garage

Keyed-alike set with 3 habitation locks

For one habitation door and typically two garage hatches. All included HEOSafe locks are operated with one key.

  • 1 cab set with 2 additional locks
  • 3 habitation locks
  • keyed alike

Which HEOSafe solution covers which purpose for a semi-integrated motorhome?

HEOSafe product Installation location Operation Function Typical scope Installation effort*
Cab additional lock
Version 2006–2021 / Boxer, Jumper & Movano up to 2024
Version Ducato 8 / Boxer, Jumper & Movano from 2025
Inside driver's and passenger door From inside, lockable Second mechanical lock for the front doors 1 set with 2 locks Low to medium: approx. 45–90 min per set; usually more with blackout frame
HEOSafe habitation lock
View habitation lock
Habitation door From inside and outside Secure regular access to the living area additionally 1 piece Medium to higher: approx. 60–120 min per lock, depending on door and surface
Additional habitation locks
View single lock
Rear garage and exterior lockers From inside and outside Provide extra protection for bikes, tools and luggage For the rear garage, typically 2 pieces Medium to higher: approx. 45–90 min per hatch
Keyed-alike set
Set from Ducato 8
Set for older door generation
Cab plus habitation One key for all locks Comprehensive, easy security for all doors Either 1 or 3 habitation locks Total effort depending on set usually several hours

* Values for careful installation by experienced users. Actual effort depends on blackout, door trim, mounting surface and installation situation.

Compatibility of habitation locks: A sufficiently flat installation surface, suitable frame area and solid mounting base are required. You must check door thickness, seals, clearance, and space for the bolt before drilling.

All door locks for semi-integrated motorhomes

Overview of cab, habitation, and additional security solutions.

View locks

HEOSafe Campervans & Van Conversions

HEOSafe additional locks for vans with sliding door and rear doors

Campervans do not have a separate habitation door. In addition to the cab, the same HEOSafe VAN Security additional lock is used in different positions to secure the sliding door and rear door.

Typical combination: One cab set with two internal locks plus two identical VAN Security additional locks — one on the sliding door and one on the rear door. The locks can be supplied keyed alike.
HEOSafe VAN Security additional lock for sliding and rear doors
Same lock for two installation points

HEOSafe VAN Security additional lock

The same product is used, depending on installation position, on either the sliding door or rear/wing door. Usually, two pieces are needed for both access points.

HEOSafe keyed-alike complete set for Fiat Ducato campervan
Keyed-alike complete set

HEOSafe security set campervan

One cab set plus two identical VAN Security locks for sliding and rear door. All HEOSafe locks are operated with the same key.

  • 1 cab set with 2 locks
  • 2 identical VAN Security locks
  • keyed alike

Which HEOSafe solution covers which purpose in a campervan?

HEOSafe product Installation location Operation Function Typical scope Installation effort*
Cab additional lock
Version 2006–2021 / Boxer, Jumper & Movano up to 2024
Version Ducato 8 / Boxer, Jumper & Movano from 2025
Inside driver's and passenger door From inside, lockable Second mechanical lock for the front doors 1 set with 2 locks Low to medium: approx. 45–90 min per set; usually more with blackout frame
VAN Security additional lock
View VAN Security
One identical lock each on sliding and rear door From outside with key Secures large access points independently of the central locking Typically 2 pieces, optionally keyed alike Medium: approx. 30–60 min per lock with easily accessible installation location
Keyed-alike campervan set
View complete set
Cab, sliding door, and rear door One key for all locks Complete mechanical extra security for the relevant doors 1 cab set plus 2 VAN Security locks Total effort typically approx. 2–3 hours

* Values for careful installation by experienced users. Adjustment, drilling, and access to bodywork may affect the effort.

Consider emergency access: Many campervans have no mechanical cylinder accessible from outside on the rear door. A second vehicle key or a suitable spare battery for the remote key should therefore be carried separately.

All door locks for campervans

Solutions for cab, sliding door, rear doors, and central locking.

View locks
HEOSafe Fiat Ducato: Year & Door Generation

Which HEOSafe cab lock fits?

With Ducato door security, the actual door generation installed is decisive. For HEOSafe cab additional locks, X250 and X290 use the same older version. From Ducato Series 8 with new door trim, you need the new version; this also applies to appropriately equipped Series 9 and 10. For Opel Movano on Stellantis basis: model years 2021–2024 use the older version, from model year 2025 the new variant.

Fiat Ducato X250 year 2006 to 2014

Ducato X250: 2006–2014

Older HEOSafe version. Characteristic are the early front design and the steering wheel, which was largely retained on the later X290.

Fiat Ducato X290 year 2014 to 2021

Ducato X290: 2014–2021

Also the older HEOSafe version. Compared to the X250, mainly the front and headlights changed, but not the relevant lock version.

Fiat Ducato Series 8 from year 2021 with newer steering wheel

Ducato from Series 8: Series 8, 9 and 10

New HEOSafe version. A clear distinguishing feature is the modernized steering wheel and the changed door trim.

Comparison of door trim: Fiat Ducato 8 left and Fiat Ducato up to 2021 right

The safest comparison: the door trim

Left: Ducato Series 8 as well as Peugeot Boxer, Citroën Jumper, and Opel Movano from 2025 — new HEOSafe version.

Right: Fiat Ducato 2006–2021 as well as Peugeot Boxer, Citroën Jumper, and Opel Movano up to 2024 — older HEOSafe version.

Vehicle Older HEOSafe version New HEOSafe version
Fiat Ducato X250 and X290, year 2006–2021 from Series 8 (Series 8/9/10) with new door trim
Peugeot Boxer Year 2006–2024 from year 2025
Citroën Jumper Year 2006–2024 from year 2025
Opel Movano Stellantis model year 2021–2024 from year 2025
Toyota Proace Max – from year 2024
Blackout & Installation

Combine HEOSafe with REMIS and Dometic blackout systems

HEOSafe cab additional locks can also be installed in many standard or retrofitted blackout systems. However, the key factor is which frame is fitted to the side door.

REMIS IV

The manufacturer’s instructions specifically describe installation for REMIS IV blackouts. The blackout frame is cut out using a template; a full removal of the frame is usually not required.

  • installation method documented by manufacturer
  • cutting required on the frame
  • more effort than without blackout

Dometic SP 300 / SP 310

The installation guides consider Dometic side blackout systems, especially SP 310. SP 300 can also generally be combined, but the mounting location and necessary cutout must be checked especially carefully.

  • Dometic SP 310 for Ducato Series 8
  • Dometic SP 300 for older Ducato generations
  • blackout frame has to be modified
Check before installation: Not every blackout is mounted identically. Check model designation, fastening points and the supplied HEOSafe template before cutting out the frame.

Installation video: HEOSafe additional lock on driver's and passenger door

The video shows the basic installation of HEOSafe cab additional locks. The individual steps are similar for older and newer door generations. Always also follow the installation instructions for the respective lock.

How much installation effort is required?

Low to medium

Cab set

The locks are integrated into the armrests. Remove cover, screw on base plate, position, and secure with a small hole. As a reference, allow about 45–90 minutes for both doors. With REMIS or Dometic, plan extra time for the frame cutout.

Medium

VAN Security

Determine installation position exactly, check door movement, drill fixing points, and align the lock. Reference: approx. 30–60 minutes per lock. For both sliding and rear door together, plan roughly 1–2 hours total.

Medium to higher

Habitation lock

Inside and outside housing must be precisely positioned, several holes drilled, the driver rod shortened, and spacer plates adjusted. Reference: approx. 60–120 minutes per lock; with interior paneling or adapter, the workload can increase significantly.

The times given are practical reference values, not manufacturer guarantees. If unsure, we recommend installation by a specialist company.

Additional layer of protection

HEOSafe and Prickstop complement each other

Prickstop makes the well-known prick attack on the door panel more difficult and works continuously without operation. A HEOSafe additional lock provides a second mechanical lock, but must be actively locked.

Prickstop: passive basic protection

  • protects the critical area on the driver's door
  • makes it harder to trigger central locking
  • works continuously without needing to be locked each time

HEOSafe: active extra lock

  • independent of central locking and onboard power
  • helps if the original lock is manipulated
  • mechanically holds the respective door closed
Selection aid

Find your HEOSafe set in four steps

Select vehicle type

Semi-integrated with habitation door or campervan with sliding door?

Check door generation

Match year, steering wheel, and shape of interior trim.

Determine access points

Cab, habitation door, garage, or sliding and rear doors?

Select keyed-alike

Operate several HEOSafe locks conveniently with one key.

Desired HEOSafe product or set not included?

We can also supply further HEOSafe configurations and custom keyed-alike combinations to order. Please contact us via the contact form or by email.

FAQ

Frequently asked questions about HEOSafe Ducato additional locks

What does "keyed-alike" mean?

All locks in a set have the same key code and can be operated with the same key.

Is the same set suitable for campervans and semi-integrated models?

No. Semi-integrated models usually need habitation locks for habitation and garage doors. Campervans use VAN Security locks for sliding and rear doors.

Are X250 and X290 different for the HEOSafe cab lock?

No. For Fiat Ducato X250 and X290 from 2006 to 2021, the same older HEOSafe version is used. The new version is needed from Ducato Series 8 with new door trim.

Does HEOSafe directly protect against the prick attack?

HEOSafe mechanically locks the door but does not prevent piercing of the door panel. That is what the additional Prickstop shield is for.

Does a HEOSafe additional lock work without power?

Yes. The locks are purely mechanical and work independently of radio, app, onboard battery, or central locking.

Will the HEOSafe habitation lock fit every motorhome door?

No. Mounting surface, frame, seal, door thickness, gap size, and substrate must be checked before drilling.

Is HEOSafe compatible with a REMIS blackout system?

Yes. HEOSafe cab additional locks can be combined with many REMIS IV blackout systems. The side blackout frame is cut at the designated spot using the HEOSafe template. Before installation, you should check which REMIS system is actually installed.

Can HEOSafe be installed with Dometic SP 300 or SP 310?

Yes. With Dometic SP 300 and SP 310, combination is generally possible. The blackout frame must be cut and/or adjusted accordingly. Vehicle generation, blackout model, and the lock’s installation template are crucial.

How long does it take to install a HEOSafe additional lock?

Depending on the lock and situation, installation usually takes about 30 minutes to 2 hours per lock. A cab set with two locks typically needs around 45 to 90 minutes. Blackout frames, difficult habitation doors, or the need for adapters may require more time.

Does installing HEOSafe require drilling?

Yes. HEOSafe cab, VAN Security, and habitation locks are permanently screwed on. Depending on the product, this requires drilling into door panels, bodywork, or habitation area. Check wiring, seals, and mounting base before drilling.

Can I install a HEOSafe additional lock myself?

Many experienced motorhome owners do the installation themselves. The prerequisites are careful measuring, suitable tools, and safe drilling on the vehicle. If unsure, installation should be carried out by a specialist company.

Still unsure which HEOSafe version fits your vehicle?

In the configurator, you can compare vehicle brand, year, type, steering wheel, and door trim. This will take you straight to the suitable HEOSafe door lock for Fiat Ducato and equivalent vehicles.

 

Andreas Janisch